Home » Products » IoT Systems & Solutions » Media Converters » Chassis Cards » C2110 Series

C2110 Series

ION Fast Ethernet Media Converter Module
100Base-TX to 100Base-FX

Product Brief

The ION C2110 is a media converter module that provides an interface between 100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into 100Base-TX copper environments. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential. The ION C2110 is a manageable device when installed in a managed ION chassis.

C2110 Series Overview

Features

Auto-Negotiation of speed and duplex on TP port
Auto-MDI/MDIX on TP port
Link Pass Through (LPT)
Far-End-Fault (FEF) detection
Automatic Link Restoration
Pause advertisement
Field Upgradeable Firmware
Can be used in any ION Platform Chassis
Standards based, will link with any Standard 100Base-TX and any Standard 100Base-FX ports

Manageable Features

Report converter status to chassis management software:
- TP and Fiber Link Status
- Hardware switch settings
- Copper Port Speed
- TP and Fiber Port Duplex
- Fault condition
Write operation includes:
- Power on/off device
- Auto-Negotiation enable/disable
- Force half or full-duplex
- Select advertising modes when
- Auto-Negotiation is enabled
- LPT enable/disable
- FEF enable/disable
- Pause enable/disable
- Auto-MDI/MDIX enable/disable

Note: Manageable Features are available when used in an ION Platform chassis along with an ION Management Module.

C2110 Series Tech Specs

Specifications
- Standards: IEEE 802.3
- Data Rate: 100 Mbps, Layer 1
- Switch
  - SW1: Auto-Negotiation (UP = enabled)
  - SW2: Pause (UP=enabled)
  - SW3: Link Pass Through (UP = enabled)
  - SW4: Far-End-Fault (FEF) (UP = enabled)
- Jumper
  - Internal Jumper: Auto-MDI/MDIX: Enable/Disable
  - Hardware: Mode of operation is determined by the settings on the 4-position switch
  - Software: Mode of operation is determined by the most recently saved on-board microprocessor settings
- Status LEDs
  - PWR (Power): ON = Connection to powered backplane
  - LKC (Copper Link): ON = Copper Link
  - RXC (Receive Copper): Blinking = Data received on Copper link
  - LKF (Fiber Link): ON = Fiber Link
  - RXF (Receive Fiber): Blinking = Data received on Fiber Link
- Dimensions
  - Width: 0.86” [22 mm]
  - Depth: 6.5” [165 mm]
  - Height: 3.4” [86 mm]
  - Weight: 1 lb. [0.45 kg]
- Power Consumption: 2.7 Watts, 230 mA @ 12 VDC
- Environment
  - Environment specs are dependent on the chassis chosen
  - Operating: 0°C to 50°C
  - Humidity: 5% to 95% (non-condensing)
  - Altitude: 0 – 10,000 ft.
- MTBF
  - Greater than 250,000 hours (MIL-HDBK-217F)
  - Greater than 667,500 hours (Bellcore)
- Certifications: CISPR/EN55022 Class A, FCC Class A, CE Mark
- Warranty: Lifetime

C2110 Series Downloads

Product Brief

C2110 Series Product Brief

245 KB

View

Additional Product Information

Note: Some Documentation may have Transition Networks named or pictured. Transition Networks was acquired by Lantronix in August 2021. Learn more about the acquisition here.

Brochures

ION Media Conversion Platform

734 KB

View

Product Information

Single Fiber Applications

248 KB

View

C2110 Series Product Notice

42 KB

View

User Guides

C2110 Series Installation Guide Rev D

1 MB

View

Visio Stencils

Plan your network with Microsoft Visio Stencils. You must log in or create a MyLantronix account to access Visio Stencils.

Firmware Downloads

Keep your products up to date by downloading the latest firmware. You must log in or create a MyLantronix account to download firmware.

C2110 Series Part Numbers

Lantronix Part #	Name	Description	Order Now
Sorry, no parts were found that match that search query.

Lantronix Part # C2110-1011	Name C2110 Series	100Base-TX (RJ-45) [100 m/328 ft.] to 100Base-FX 1300nm multimode (ST) [2 km/1.2 mi.] Link Budget: 11.0 dB	Buy Now
Lantronix Part # C2110-1013	Name C2110 Series	100Base-TX (RJ-45) [100 m/328 ft.] to 100Base-FX 1300nm multimode (SC)[2 km/1.2 mi.] Link Budget: 11.0 dB	Buy Now
Lantronix Part # C2110-1039	Name C2110 Series	100Base-TX (RJ-45) [100 m/328 ft.] to 100Base-FX 1300nm multimode (LC) [2 km/1.2 mi.] Link Budget: 11.0 dB	Contact Us
Lantronix Part # C2110-1014	Name C2110 Series	100Base-TX (RJ-45) [100 m/328 ft.] to 100Base-FX 1310nm single mode (SC) [20 km/12.4 mi.] Link Budget: 16.0 dB	Contact Us
Lantronix Part # C2110-1019	Name C2110 Series	100Base-TX (RJ-45) [100 m/328 ft.] to 100Base-FX 1310nm single mode (LC)[20 km/12.4 mi.] Link Budget: 17.3 dB	Contact Us
Lantronix Part # C2110-1040	Name C2110 Series	100Base-TX (RJ-45) [100 m/328 ft.] to 100Base-X SFP Slot (empty)	Contact Us
Compatible Accessories
Lantronix Part # SFP Modules	Name SFP Modules		Contact Us