Home » Products » IoT Systems & Solutions » Media Converters » Media Converter Accessories » SPS-2460-SA

SPS-2460-SA

Stand-Alone Power Supply

Product Brief

Product Details

SKU

SPS-2460-SA

Description

For use with all stand-alone media converters and some chassis

Lantronix’ wide input external power supplies allow you to provide a wide range of input voltages to power your stand-alone converters and chassis. Input voltages of 24 – 60 VDC and 24 – 42 VRMS allow for installation of any of Lantronix’ stand-alone media converters in most industrial, telecom and commercial applications, as well as HVAC and building controlled environments.

Multiple form factors allow flexibility to meet your application. The stand-alone form factor can be used with all Lantronix’ stand-alone media converters. The piggy back form factor allows the power supply to attach directly to the converter and eliminate the power cable commonly found between the power supply and the converter. Once the piggy back supply is attached to the converter, the combined assembly is much easier to wall mount or attach to DIN Rail environments than using a separate supply.

SPS-2460-SA Tech Specs

Power Output

Voltage: 12.25 VDC
Current: 1.0A
Load Regulation: ±5% at 10% load to full rated load
Noise and Ripple: ±40 mV peak-to-peak of output voltag

Power Input

Voltage: 24 – 60 VDC; 24 – 42 VMRS
Efficiency: 80% (typical)

Isolation Voltage

(Dielectric withstand) Meets IEC 950 for one minute
1500 VAC: Output/Input
1500 VAC: Input/Safety GND
1500 VAC: Output/CASE

Protection

Over Load Protection (OLP): When the average power rating exceeds 125%-150% of maximum power, output voltages
reduced to a safe dissipation level
Protects against short circuit of any output
No Load Protection: No damage to power supply when operating at no load
Transient Protection: No voltage spike at power-on, power-off, or power failure

Dimensions

Width: 3.75” [95 mm]
Depth: 3.1” [79 mm]
Height: 1″ [25 mm]

Power Consumption

3 Watts (max) @ 24 VDC input, 12.25 VDC output

Environment

Operating: -20°C to 65°C
Storage: -40°C to 85°C
Humidity: 5% to 95% (non-condensing)
Altitude: 0 – 10,000 ft.

Weight

1 lb. [0.45 kg]

MTBF

Greater than 250,000 hours (MIL-HDBK-217E)

Certifications

CISPR/EN55022
Class A
FCC Class A

Warranty

Lifetime

SPS-2460-SA Downloads

Additional Product Information

Note: Some Documentation may have Transition Networks named or pictured. Transition Networks was acquired by Lantronix in August 2021. Learn more about the acquisition here.

Product Information

SPS-2460-xx Datasheet

186 KB

View

User Guides

SPS-2460-xx User Guide Rev D

679 KB

View

Compatible Products

M/GE-UxX Series	Mini Gigabit Ethernet Unidirectional Media Converter 10/100/1000Base-T Port to 100/1000Base-X Port	View Details
E-100BTX Series	Stand-alone Fast Ethernet Media Converter 100Base-TX to 100Base-FX	View Details
SFMFF1314-220	Stand-alone Fiber to Fiber Media Converter 1000Base-SX or 1000Base Fiber Channel	View Details
S6120 Series	Stand-alone DS1 - T1/E1/J1 Network Interface Device 4 x DS1 - T1/E1/J1 + 10/100 Ethernet over Fiber	View Details
S6110-1040	Stand-alone DS1 - T1/E1/J1 Network Interface Device 4 x DS1 - T1/E1/J1 over Fiber	View Details
S6010 Series	Stand-alone DS1 - T1/E1 Remotely Managed NID DS1 - T1/E1 over Fiber	View Details
SRS2F Series	Stand-alone RS232 Remotely Managed Media Converter RS232 Copper to Fiber	View Details
SGFEB Series	Stand-alone Gigabit Ethernet Media and Rate Converter 10/100/1000Base-T to 1000Base-SX/LX	View Details
SGETF Series	Stand-alone Gigabit Ethernet Media Converter 1000Base-T to 1000Base-SX/LX	View Details
M/GE-T Series	Mini Gigabit Ethernet Media Converter 1000Base-T to 1000Base-SX/LX	View Details
SBFTF Series	Stand-alone Fast Ethernet Media and Rate Converter 10/100Base-TX to 100Base-FX	View Details
SBFTF1010-130	Stand-alone Fault-Tolerant Redundant Link Protector 10/100Base-TX	View Details
M/GE-PSW Series	Mini Gigabit Ethernet Media Converter 10/100/1000Base-T to 1000Base-SX/LX	View Details
S6210 Series	Stand-alone DS3-T3/E3 Network Interface Device DS3 – T3/E3 Coax over Fiber	View Details
M/E-TX Series	Mini Fast Ethernet Media Converter 100Base-TX to 100Base-FX	View Details
M/E-PSW Series	Mini Fast Ethernet Media Converter 10/100Base-TX to 100Base-FX	View Details
J/RS232 Series	Stand-alone RS232 Media Converter RS232 Copper to Fiber	View Details
F-SM-MM-02	Stand-alone Fiber to Fiber Media Converter Fiber to Fiber for Data Rates from 100Mbps to 155Mbps	View Details
E-100BTX-HT Series	Unmanaged Hardened Fast Ethernet Media Converter (1) 100Base-TX Port + (1) 100Base-FX Port	View Details