xPico 270 Embedded IoT Gateway

Focus

xPico 270 Embedded IoT Gateway Tech Specs

Wireless LAN Specifications

• IEEE 802.11 a/b/g up to 54 Mbps; 802.11 n (1×1) up to 150 Mbps;
  802.11ac up to 433 Mbps
• 20, 40 and 80 MHz channel width with optional SGI
• Dual Band 2.4 GHz and 5 GHz,
• Supports IEEE 802.11 d/h/i
• 802.11r fast roaming

Ethernet Specifications

• IEEE 802.3 MAC, 10Base-T and 100Base-TX (RMII)

Bluetooth Specifications

• Compliant to Bluetooth Core Specification version 4.2 (BR/EDR/Bluetooth LE)
• Bluetooth LE Central and Peripheral Roles
• Support for Generic Access Profile (GAP), Generic Attribute Profile (GATT), Device ID Profile, Serial Port Profile (SPP)

Data Communication

• TruPort^® Serial Technology— TCP and UDP Server Mode, TCP and UDP Client Mode, Multi-host Connect; TLS Client and Server
• TruPort^® Socket— Multi-host Client and Server Modes, HTTP(S), Sockets, TLS
• Authenticated SMTP Support— Send email directly from device
• Modbus TCP to Modbus RTU/ASC11 gateway.

Security and Authentication

• InfiniShield^® Security Software
  • Secure Boot, Secure Firmware-Over-the-Air (FOTA) Updates
  • Secure Key Storage, Encrypted Configuration
  • Secure Connections with SSL/TLS, HTTPS
  • Software Controlled Network Service Ports Enable/Disable
  • Role Based Access Control
• AES/CCMP and TKIP encryption, WPA/WPA2 Personal
• WPA2 Enterprise (EAP-TLS, EAP-TTLS, EAP-PEAP, EAP-FAST)
• WPA3-Enterprise Transition Mode and WPA3-Personal (requires firmware v5.0.0.0 or later)
• SSLv3/TLS 1.2 with PKI and X.509 Certificates (up to 4096-bit Keys)
• AES Algorithm, 256-bit, 192-bit, 128-bit

Management Interfaces

• Lantronix Percepxion™ cloud-based IoT edge solution, REST, MQTT
• Lantronix Discovery Protocol (77FE)
• Serial Port, Internal Web Server (HTTP/HTTPS)
• XML Configuration and XML Status (CLI, API)
• Secure Firmware Upgrade via HTTPS
• Remote management with Percepxion™

Protocol Support

• DHCP Client, Server (Soft AP), HTTP Server/Client
• IPv4, TCP/IP, UDP/IP, ARP, ICMP, Auto-IP, DNS
• SNMP v1/v2
• IPv6

Wireless Features

• Concurrent Soft AP + STA (Client), Client, Soft AP
• Up to 5 simultaneous client connections to Soft AP interface
  • Up to 4 in Concurrent Mode
• Connect to multiple WLAN networks, WLAN QuickConnect
• Ethernet to Wi-Fi Client Bridge (Single Host Mode), Auto-MAC ID

Operating Conditions

• Operating Temp: -40°C to +85°C; Storage Temp: -40°C to + 85°C
• Vibration (Operational): 40G; Non-operational Shock: 65G
• Storage Humidity: 10% to 85% relative humidity, non-condensing

Host Interfaces

• Serial: UART Port TTL
  • Data Rates: 9600 bps to 4 Mbps (software selectable)
  • Control signals: DTR/DCD; Flow Control: RTS/CTS; XON/XOFF
• USB (Host) 12 Programmable I/O Pins (GPIOs)
• System Pins: RESET, DEFAULT, WAKE

Power

• Input Voltage: 3.3VDC
• Max Current Consumption (Boot Peak): 600 mA

Dimensions & Packaging

• Dimensions: 17mm x 25mm x 2mm (LGA); 22mm x 35.5mm x 2.73 mm (Edge Card)
• For LGA: Tape and Reel, MSL 3
• For Edge Connector: Tray

Certifications & Compliance (Planned for Product Release)

• Type Approvals: USA (FCC Part 15), Canada (IC RSS), EU (RED), AU/NZS
• Safety: IEC 62368 EN 62368, EN 62311, UL 60950
• RoHS, REACH

Warranty

• 5-Year Limited