SISPM1040-3166-L

Managed Hardened Gigabit Ethernet PoE+ Rack Mountable Switch
(16) 10/100/1000Base-T PoE+ Ports + (4) 100/1000Base-X SFP Slots + (2) 1G/10GBase-X SFP+ Slots

This switch is a next generation rack mountable hardened switch with 80Gbps switching capacity. It provides (16) 10/100/1000 PoE+ ports, (4) 100/1000 dual speeds SFP ports and has (2) additional 1G/10G SFP+ slots.

NDAA Compliant

SISPM1040-3166-L Overview

Features

  • IPv4/IPv6 dual protocols
  • Supports Jumbo Frame up to 9K bytes
  • Authentication – RADIUS, TACACS+
  • DHCP Relay, DHCP Snooping, DHCP Server
  • L2/L3/L4 ACLs Support MAC, VLAN ID, or IP address, protocol, per port
  • LLDP (Link Layer Discovery Protocol)
  • ITU-T G.8031 Ethernet Linear Protection
  • ITU-T G.8032 Ethernet Ring Protection Switching
  • Rapid Ring for fast recovery
  • IEC 62439-2 Media Redundancy Protocol (MRP)
  • IEEE 802.3az Energy Efficiency
  • IP Source Guard, Port Security
  • Port Mirroring
  • Syslog
  • Static Routing, 130 rates (max)
  • Fanless Design
  • Media Redundancy Protocol (MRP)

 

PoE Features

  • Compliant with IEEE 802.3at PoE+
  • Compliant with IEEE 802.3af PoE
  • IEEE 802.1AB LLDP-MED Configuration
  • PoE Configuration
  • PoE Scheduling
  • Power Delay
  • Auto Power Reset
  • DHCP per Port
  • Always on PoE

 

Software Features

  • Management: Web Management, SNMP V1/V2c/V3, SSH, CLI
  • Port Trunk: Supports IEEE 802.3ad port trunk with link aggregation control protocol (LACP) and static trunk
  • Multicast: Support IGMP Snooping V1/V2/V3, MVR, MLD Snooping V1/V2
  • Quality of Service: Supports 8 hardware queues. Strict priority and WRR, Ingress policer, Egress shaping and per port rate control
  • Spanning Tree: Supports IEEE 802.1s MSTP, IEEE 802.1w RSTP and IEEE 802.1D STP Compliant
  • VLAN: Port Based VLAN, IEEE 802.1Q tag-based, up to 4k VLAN entries, Q-in-Q, MAC-based VLAN, Management VLAN, Voice VLAN, Private VLAN
  • Firmware Update through TFTP and HTTP/HTTPs
  • E-Line, E-LAN, E-TREE, E-ACCESS, IEEE 802.3ah, IEEE 802.1ag, ITU-T Y.1731, Y.1564
  • Support IEEE 1588 v2 PTP (TC)

 

Device Management System (DMS)

  • Graphical Monitoring – Topology view, Floor view, Map view
  • Traffic Monitoring
  • Troubleshooting – Network Diagnostic, protection mechanism, performance and link management

Videos

Last Updated: 04/15/2022

SISPM1040-3166-L Tech Specs

Standards

  • IEEE 802.3
  • IEEE 802.3u
  • IEEE 802.3z
  • IEEE 802.3ae
  • IEEE 802.3x
  • IEEE 802.3ad
  • IEEE 802.1D
  • IEEE 802.1w
  • IEEE 802.1s
  • IEEE 802.1Q
  • IEEE 802.3p
  • IEEE 802.1ad
  • IEEE 802.1AB
  • IEEE 802.3af
  • IEEE 802.3at
  • IEEE 802.3az
  • IEEE 802.3ah
  • IEEE 802.1ag
  • IEC 62439-2

Protocols

  • CSMA/CD

Technology

  • Store-and-forward switching architecture

Connectors

  • (16) 10/100/1000 Mbps RJ-45 ports
  • (4) 100/1000 Mbps SFP slots
  • (2) 1G/10G SFP+ slots
  • (1) Console RJ-45 port

MAC Address

  • 32K MAC address table

Backplane

  • 80 Gbps

Digital Output

  • 24 VDC / 1A (Relay)

Digital Input

  • Level 0 (low): 0V to 6V
  • Level 1 (high): 10V to 24V

Dimensions

  • Width: 17.4” [442 mm]
  • Depth: 11.81” [300 mm]
  • Height: 1.73” [44 mm]

Power Input

  • 52 – 57VDC Dual Input Terminal Block or Single Input 100 – 250VAC
  • Maximum Power Consumption (without PoE): 36 Watts

Power-over-Ethernet

  • Max PoE Budget 250 Watts (PoE power not available with use of AC power supply)
  • 15 Watts for (16) ports simultaneously
  • 30 Watts for (8) ports simultaneously

Ingress Protection

  • IP30

Environment

  • Operating: -40°C to +75°C (1G SFPs)
  • Operating: -40°C to +60°C (10G SFPs)
  • Humidity: 5% to 95% (non-condensing)
  • Altitude: 0 – 10,000 ft.

Weight

  • 10.58 lbs. [4.8 kg]

Certifications

  • FCC Class A; CE; NEMA TS-2, UL
  • Safety: LVD

Compliant*

(Designed to Meet) *Please contact sales with certification needs

  • IEC61850-3, IEEE 1613, Class 1 Div 2

Warranty

  • 5 Years

SISPM1040-3166-L Downloads

Additional Product Information

Note: Some Documentation may have Transition Networks named or pictured. Transition Networks was acquired by Lantronix in August 2021. Learn more about the acquisition here.

Visio Stencils

Plan your network with Microsoft Visio Stencils. You must log in or create a MyLantronix account to access Visio Stencils.

Firmware Downloads

Keep your products up to date by downloading the latest firmware. You must log in or create a MyLantronix account to download firmware. 

Lantronix Part # Name Description Order Now
Sorry, no parts were found that match that search query.
Lantronix Part #
SISPM1040-3166-L
Name
SISPM1040-3166-L

(16) 10/100/1000Base-T PoE+ ports + (4) 100/1000Base-X SFP slots + (2) 1G/10GBase-X SFP+ slots 52V – 57 VDC or 100V – 250VAC

Contact Us
Compatible Accessories
Lantronix Part #
SFP Modules
Name
SFP Modules
Contact Us
Lantronix Part #
25104
Name
25104

Industrial DIN Rail Mounted Power SupplyInput: 85-264 VAC, 124-370 VDC Output: 48~55 VDC, 5.0A, 240 Watts

Contact Us
Lantronix Part #
25160
Name
25160

Input 90-264 VAC, 127-370 VDC Output: 48 ~ 55 VDC, 10A, 480 Watts

Contact Us

Complete the Solution

ConsoleFlow
Increase your operational efficiency and create new revenue generation streams with our ready-to-use software platform for your IoT and REM assets.
Connectivity Services
Our IoT cellular platform simplifies connecting your global IoT fleet, on every network, using a single SIM.
LEVEL, Technical Services
Our dedicated technical experts are here to assist with your unique IoT and IT solutions.
scroll to top

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close